Quaternary Ammonium Polyelectrolytes. V. Amination Studies of Chloromethylated Polystyrene with N,N-Dimethylalkylamines

The amination reactions of chloromethylated polystyrene with N,N-dimethyldodecylamine, N,N-dimethyltetradecylamine, and N,N-dimethylhexadecylamine were studied. The physical properties, particularly the solubility properties of the resulting polymers, are influenced by the hydrophobic properties of the long alkyl chain on the N⁺ atoms. The main factor that influences the kinetics of the reactions is the polymersolvent interaction parameter.     

Styrene-PEG (600) DMA Crosslinked Polymers for Absorption of Oil Derivatives

In this work, styrene (St) based crosslinked polymers were prepared for removal of oil derivatives from aqueous solutions. Polyethylene glycol (600) dimethacrylate (PEG (600) DMA) was used as crosslinker in synthesis of styrene based crosslinked polymers, for the first time. The polymers were characterized by FTIR, SEM, elemental analysis and solvent (toluene, chloroform and fuel-oil) absorption capacities. The effects of different reaction parameters like crosslinker type, diluents amount and the presence of pore forming agent on the absorption properties of polymers were investigated. The polymers synthesized by using PEG (600) DMA have higher solvent absorption capacity than that of synthesized by using conventional crosslinker. Furthermore, the polymers synthesized in the presence of good diluents have higher absorption capacities. The addition of pore forming agent into the reaction medium has also improved the absorption rate of polymers. The absorption capacity of polymers in different solvents is in order of chloroform > toluene > fuel-oil. It was seen that oil derivatives can be removed efficiently from water by the St-PEG (600) DMA polymers.     

Synthesis and Properties of pH-Responsive Polymers with Cadaverine Side Groups

A water-soluble monomer N¹-(4-vinylbenzyl)-pentane-1,5-diamine dihydrochloride (VBPDA) with cadaverine (1,5-pentanediamine) group was synthesized. pH-responsive polymer with cadaverine group was obtained by free radical polymerization of VBPDA using 4,4-azobis(4-cyanovaleric acid) (ACVA) as the initiator. The structure and molecular weight of the polymer were characterized by FTIR, ¹H-NMR and GPC-MALLS. Aggregation behavior of the polymer in aqueous solution was investigated by dynamic light scattering (DLS), UV-Vis and fluorescence measurements. The experimental results show that the fluorescence intensity of the aggregates decreases and the size of the aggregates increases with increasing pH due to the continuous dehydration of the cadaverine side groups.     

PHOTOELECTRON SPECTROSCOPY STUDY OF AMMONIA-INDUCED CHANGES IN ELECTROSTATICALLY-ASSEMBLED CONJUGATED POLYMER FILMS

ABSTRACT

Exposure of electrostatically assembled polyelectrolyte films comprised of the anionic carboxylic conjugated polymer poly[2-(3-thienyl)-ethanolhydroxycarbonylmethyl-urethane], hereafter referred to as H-PURET, and polycations such as poly(diallyldimethylammonium) chloride, here after referred to as PDADMAC, to aqueous ammonia vapor leads to dra matic changes in the ultraviolet-visible absorption spectrum. In the case of H-PURET/PDADMAC, a shift from 442 to 494 nm is observed upon overnight ammonia exposure. X-ray photoelectron spectroscopy has been used to investigate the mechanism of the changes in optical properties. The C1s, O1s and S2p core levels exhibit negligible ammonia-induced changes. Two N1s peaks are observed in virgin H-PURET/PDADMAC assemblies, and ammonia exposure causes the nitrogen peak corresponding to the H-PURET side chain to become more intense relative to that of the PDADMAC layer. This selective change in the N1s feature suggests that ammonia interacts with the polythiophene side-chain, presumably by deprotonating the fraction of carboxylic acid groups that remain in the H-PURET layer. This deprotonation apparently leads to structural or single chain conformational changes in the conjugated polymer layers that alter the electronic absorption spectrum.     

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.     

Synthesis of Novel Semiconducting Aromatic Polyesteramids Containing Pyridine: Characterization of Nanometer-Sized Rod-Like Analogues and their Copper (II) Complexes

In this paper, new thermally stable isomeric unsubstituted polyesteramides have been successfully prepared by condensation of aromatic acids chlorides namely; isophthaloyl, pyridine-3,5-dicarbonyl and pyridine-2,6-pyridine-dicarbonyl dichlorides with the aminophenol isomers in NMP. Conducting the reaction in NMP/H₂O (90/10 v/v) followed by centrifugal separation furnished the desired polymers as rod-like nanoparticles. The morphology of obtained nanoparticles were studied by SEM. Mixing NMP with H₂O was essential for controlling the particles morphology and as a reaction accelerator.

Pyridine-containing polymers exhibit semi-conducting nature as their conductivities increase with increasing temperature, while no variation of the conductivity with the temperature was observed for their corresponding phenylene analogues. Introduction of the nitro group into the polymer backbone led to a red shift in the absorption and the obtained polymers have a bright yellow color, which is unusual with this polymer group. Copper (II) ions were complexed the polyesteramides-containing nitro group in a (1:1) ratio. Complexes of pyridine-containing polymers exhibit semiconducting nature changed to metallic characters on heating and their conductivities increased tens of magnitudes than their corresponding ligands. These new types of polymeric materials and their nano-sized rods may have numerous applications in nanotechnology and their properties can be tuned for specific applications such as conducting adhesives and coating materials.     

Chitooligosaccharide Copolymers: Synthesis and Aqueous Self-assembly

Novel water-soluble amphiphilic graft copolymers (COS-g-PCL-b-MPEG) were synthesized by the coupling reaction between chitooligosaccharide (COS) and MPEG-b-PCL-COOH, which was synthesized via ring-opening polymerization of ε-caprolactone (CL) using MPEG as an initiator and subsequent carboxylation by succinic anhydride. The chemical composition of the graft copolymers was confirmed by ¹H-NMR spectra and FT-IR spectrometry. The thermal properties and crystallinity of the copolymers were observed by DSC and XRD measurements, which showed the existence of separate backbone and graft chain phases in the copolymer. The micellar behavior via self-assembly of the graft copolymers in aqueous solution was studied using pyrene fluorescence dye technique. AFM measurements showed that the micelles had a spherical morphology at the critical micelle concentration (CMC) and ranged in size from 20–45 nm. The amphiphilic ternary biodegradable graft copolymer endows the hydrophilic outer shell of micelles with structural and functional diversification, which might be desirable for drug delivery applications.     

Molecular Assembly by Sequential Ionic Adsorption of Nanocrystalline TiO2 and a Conjugated Polymer

Abstract

Cationic nanocrystalline TiO₂ particles have been synthesized for which the size and composition of the nanoparticles were analyzed by a transmission emission microscopy and energy dispersive x‐ray spectrometer (EDXS). Multilayered films have been fabricated by sequential adsorption of TiO₂ nanoparticles and poly(3‐thiophene acetic acid) (PTAA). Each layer of the nanoparticles and PTAA in the thin film has also been characterized by x‐ray photoelectron spectroscopy, atomic force microscopy, and UV‐visible spectroscopy. These types of multilayered nanocomposite films may find applications in the fabrication of efficient light harvesting photovoltaic cells.     

Magnetic Polymer Composite Particles Via In situ Inverse Miniemulsion Polymerization Process

We aimed at preparing magnetic iron oxide particles by the oxidation-precipitation method in order to encapsulate these particles in polymer matrices composed of poly(acrylamide-styrene sulfonic acid sodium salt). Nanocomposites were synthesized by the incorporation of surface treated magnetic nanoparticles in the synthesized polymers via in situ inverse mini-emulsion polymerization process. The study parameter was the ionic monomer content in the synthesized polymers. The structure and the morphology of the magnetic nanogels were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM). FTIR and XRD showed that pure magnetite was formed and successfully encapsulated in the composite nanoparticles. The polymer encapsulation could reduce the susceptibility to leaching and could protect the magnetite particle surfaces from oxidation. The ionic monomer content had a great effect on the magnetization behavior. Magnetite prepared by the oxidation precipitation method, of 50 nm mean particle size, was embedded successfully into the polymer nanogels with a reasonable magnetic response, as proved by vibrating sample magnetometer measurement. Magnetic nanocomposites were proven to be super-ferromagnetic materials.     

Mechanical,Thermal and Morphological Behaviors of Castor Oil Based PU/PS Interpenetrating Polymer Network-Metakaolin Composites

The meta kaolin (MK) clay particulate filler with different weight ratios viz., 0, 5, 10, 20 and 30 wt% were incorporated into castable polyurethane (PU)/polystyrene (PS) (90/10) interpenetrating polymer network (IPN). The effects of MK particulate filler loading on the mechanical and thermal properties of PU/PS (90/10) IPN composites have been studied. From the tensile behavior, it was noticed that a significant improvement in tensile strength and tensile modulus as an increase in MK filler content. Thermogravimetric analysis (TGA) data reveals the marginal improvement in thermal stability after incorporation of MK filler. TGA studies of the IPN composites have been performed in order to establish the thermal stability and their mode of thermal degradation. It was found that degradation of all composites takes place in two steps. Degradation kinetic parameters were obtained for the composites using three mathematical models. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic (SEM) technique.